6mm Tact Switch 2-Pin (Pack of 10 Pcs)

A 6mm Tact Switch (or 6mm tactile switch) is a small, momentary push-button switch commonly used in electronic circuits for user input. It’s designed to provide tactile feedback when pressed, typically in devices where a small switch is required for triggering an action.

Here’s a detailed overview:

Key Features:

1. Size:

• The switch is 6mm in width, referring to the diameter of the base of the switch. The height can vary but typically is around 3 to 4mm depending on the specific model.
• These switches are usually quite small, making them ideal for use in compact and portable electronic devices.

1. Pins:

• 2-pin configuration: The switch has two leads (pins) that are used to connect the switch to a circuit. These two pins close (or open) the circuit when the switch is pressed.
• These are typically through-hole pins that are soldered into a PCB (printed circuit board), although surface-mount versions exist as well.

1. Tactile Feedback:

• Tactile switches are momentary switches, meaning they only close the circuit while the button is being pressed. Once the button is released, the switch returns to its original state.
• They provide tactile feedback, meaning you can feel a slight "click" or "bump" when the switch is pressed. This helps the user know that the switch has been activated.

1. Current and Voltage Ratings:

• Typical Ratings: These switches are usually rated for low current and voltage, often up to 50mA to 100mA at 12V or lower. They are not designed to handle high power but rather signal-level currents.
• You should check the exact specifications for the specific model you're using, as these ratings can vary between manufacturers.

1. Operation:

• Momentary Operation: As mentioned, the switch will only maintain a closed circuit while being pressed and immediately returns to the open state when released.
• It’s used for functions like toggling a setting, sending a pulse to a microcontroller, or triggering an event in a device.

1. Mounting Type:

• Through-Hole Mounting: Common for most 6mm tactile switches, where the leads are inserted through holes in the PCB and soldered.
• Surface-Mount (SMD): Some versions of tactile switches are designed for surface-mounting, but the 6mm size typically refers to through-hole types.

Applications:

6mm tactile switches are often used in applications where space is limited, and user interaction is needed. Common uses include:

1. Consumer Electronics:

• Common in devices like TV remotes, keyboards, game controllers, and calculators.

1. Embedded Systems:

• Used in hobbyist electronics and DIY projects, such as with Arduino or Raspberry Pi for user inputs.

1. Remote Controls and Toys:

• Found in many small gadgets and remote controls, where a compact switch is required for turning things on/off or controlling specific functions.

1. Circuit Boards and Test Equipment:

• Often used as reset buttons or for testing purposes in various electronic devices.

1. Automotive and Industrial Controls:

• Found in various dashboard controls and safety switches in cars and industrial equipment.

Brand:- Generic

Origin:- China